Anchorage Training Schedule
Anchorage Training Schedule
Scroll Down this page or type the name of the course in the search bar to search all training offered during the 2023-24 training season
Asbestos Abatement Supervisor
40HR
Renewal: 8HR, annually
Classroom and hands-on training in the remediation techniques and safety used in abatement. Certification pertaining to CFR 1926.1101.
Students shall pay $100 license fee by the first day of class to be eligible for training.
Grade Checking IV, GPS
40HR
Consolidated in Anchorage
PRE-REQ - Grade Checking III, Advanced Grade
Daily training starts at 8:00 AM and finishes at 4:30 PM
Hands-on course designed to familiarize grade checkers with GPS set up and field usage.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Hazardous Waste Worker
40HR
Renewal: annually
Safety and health orientation for containment and cleanup of hazardous waste. Certification pertaining to CFR 1910.120. Highly recommend for all Construction Craft Laborers.
MSHA New Miner
16HR
Daily training starts at 8:30 AM and finishes at 4:30 PM
Designed to allow members to perform work in the above ground mining industry under subpart 48b or part 46 sand and gravel mines.
Rapid Plan
8HR
PRE-REQ: Traffic Control Supervisor (TCS)
Computer aided design and development of temporary traffic control plans using Rapid Plan software. Must have medium-level computer competency.
LiUNA Traffic Control Supervisor (TCS)
16HR, renewal: 4 years
Traffic Control Supervisor Certification
PRE-REQ: LiUNA Work Zone Safety Certification, 4,000 hours of experience or existing IMSA TCT Certificate or ATSSA TCS Certificate
Description: The 16-hour Traffic Control Supervisor course is designed to help the supervisor create a safe roadway construction work zone for workers and travelers by applying guidelines and developing structured processes for implementing internal and external traffic control plans. Participants gain critical knowledge in the types of traffic control devices and how they are used, set up and dismantled.
Pipelaying II
80HR
Consolidated in Anchorage
PRE-REQ - Pipelaying I
Daily training starts at 8:00 AM and finishes at 4:30 PM
An intermediate level course on the installation of water, sewer, and storm drain systems. Participants will work in real time with equipment, learn about trench safety, and installation practices.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
LiUNA WORK ZONE SAFETY (Flagging Certification)
16HR, renewal: 4 years
NEW FLAGGERS & RENEWING FLAGGERS
PRE-REQ: None
Note: This course serves as a mandatory pre-requisite for LiUNA Traffic Control Supervisor Course
Description: Work Zone Safety course teaches participants about highway work zone hazards and actions workers can take to protect themselves while performing highway construction work. Participants learn about dangers associated with construction equipment, the types of roads and conditions that impact safety, traffic control zones, traffic control devices, hand-signaling devices, and environmental hazards. In addition, participants learn how to perform flagger duties safely and effectively.
Grade Checking III, Advanced Grade
80HR
Consolidated in Anchorage
PRE-REQ - Grade Checking II, Intermediate Grade
Daily training starts at 8:00 AM and finishes at 4:30 PM
Civil plan reading, advanced grade computations, horizontal and vertical curves, super elevated curves, volume computations, and line and grade for pipe.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Hazardous Waste Worker Renewal
8HR
Renewal: annually
PRE-REQ - Current Hazardous Waste Certification
Safety and health orientation for containment and cleanup of hazardous waste. Certification pertaining to CFR 1910.120. Highly recommend for all Construction Craft Laborers.
Asbestos Supervisor Renewal
8HR
Renewal: 8HR, annually
PRE-REQ - Current Asbestos Supervisor Certificate
Classroom and hands-on training in the remediation techniques and safety used in abatement. Certification pertaining to CFR 1926.1101.
Students shall pay $100 license fee by the first day of class to be eligible for training.
Grade Checking II, Intermediate Grade
80HR
Consolidated in Anchorage
PRE-REQ - Grade Checking I, Basic Grade
Daily training starts at 8:00 AM and finishes at 4:30 PM
Civil plan reading, advanced grade computations, horizontal and vertical curves, super elevated curves, volume computations, and line and grade for pipe.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Scaffolding
40HR
Daily training starting Monday and finishing Friday
8:00 AM - 4:30 PM
Frame, tube and clamp, systems, and safety regulations with an emphasis on building and design
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
LiUNA Traffic Control Supervisor (TCS)
16HR, renewal: 4 years
Traffic Control Supervisor Certification
PRE-REQ: LiUNA Work Zone Safety Certification, 4,000 hours of experience or existing IMSA TCT Certificate or ATSSA TCS Certificate
Description: The 16-hour Traffic Control Supervisor course is designed to help the supervisor create a safe roadway construction work zone for workers and travelers by applying guidelines and developing structured processes for implementing internal and external traffic control plans. Participants gain critical knowledge in the types of traffic control devices and how they are used, set up and dismantled.
Aerial Lift & Rough Terrain Forklift
24HR
Daily training starts on Wednesday at 8:00 AM and finishes on Friday at 4:30 PM
Safety, Inspection, and operation for rough terrain forklift and aerial lifts - MEWP (mobile elevating work platforms).
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
LiUNA WORK ZONE SAFETY (Flagging Certification)
16HR, renewal: 4 years
NEW FLAGGERS & RENEWING FLAGGERS
PRE-REQ: None
Note: This course serves as a mandatory pre-requisite for LiUNA Traffic Control Supervisor Course
Description: Work Zone Safety course teaches participants about highway work zone hazards and actions workers can take to protect themselves while performing highway construction work. Participants learn about dangers associated with construction equipment, the types of roads and conditions that impact safety, traffic control zones, traffic control devices, hand-signaling devices, and environmental hazards. In addition, participants learn how to perform flagger duties safely and effectively.
MSHA New Miner
16HR
Daily training starts at 8:30 AM and finishes at 4:30 PM
Designed to allow members to perform work in the above ground mining industry under subpart 48b or part 46 sand and gravel mines.
Rough Terrain Forklift Renewal
8HR
PRE-REQ - Current Rough Terrain Forklift Certification
Classroom and hands-on training.
Hoisting & Rigging Renewal
8HR
Renewal: 8HR, every 3 years
PRE-REQ - Current Hoisting & Rigging Certification
Daily training starts at 8:00 AM and finishes at 4:30 PM
Emphasis on up-to-date regulatory changes, renew rigging and signaling skills. Upon successful completion of this course individuals will receive recertification.
Grade Checking I, Basic Grade
40HR
PRE-REQ - Construction Math
Daily training starts at 8:00 AM and finishes at 4:30 PM
General grade checking knowledge is the first step for members interested in pursuing a career in the civil construction industry. Highly recommended for all construction craft laborers.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Asbestos Abatement Supervisor
40HR
Renewal: 8HR, annually
Classroom and hands-on training in the remediation techniques and safety used in abatement. Certification pertaining to CFR 1926.1101.
Students shall pay $100 license fee by the first day of class to be eligible for training.
Hoisting & Rigging
40HR
HOIST.RIG
Renewal: 8HR, every 3 years
PRE-REQ - Construction Math
Daily training starts at 8:00 AM and finishes at 4:30 PM
Rigging techniques, including safety, inspection, correct rigging selection, and weight calculations. Certification pertaining to ANSI A10.42 and CFR 1926.1428.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Plan Reading
24HR
PRE-REQ - Construction Math
Daily training starts at 8:00 AM and finishes at 4:30 PM
Attain a working knowledge of structural, architectural, and civil drawings. Methodology for finding details and entities as well as layout.
Pipeline Insulation
80HR
PRE-REQ: Construction Math
Daily training starts at 8:00 AM and finishes 4:30 PM
Math and layout techniques of Trans-Alaska Pipeline Insulation. Including installation, safe tools and equipment operation.
First Aid, CPR/AED
8HR
Renewal: 8HR, every 2 years
Certify students in techniques used in First Aid, CPR, and AED as specified by NSC (National Safety Council).
Hazardous Paint Certification Renewal
8HR
Hybrid Anchorage/Fairbanks
PRE-REQ - Current Hazardous Paint Initial
Students shall pay the $100 license fee by the first day of class to be eligible for training.
Asbestos Supervisor Renewal
8HR
Renewal: 8HR, annually
PRE-REQ - Current Asbestos Supervisor Certificate
Classroom and hands-on training in the remediation techniques and safety used in abatement. Certification pertaining to CFR 1926.1101.
Students shall pay $100 license fee by the first day of class to be eligible for training.
Foreman Training
40HR
PRE-REQ - Business Agent Recommendation
*OSHA 30 is recommended for all Foreman and Supervisors
Daily training starts at 8:00 AM and finishes at 4:30 PM
Introduction to construction supervision, communication, problem solving and record keeping for construction supervisors.
OSHA 30
30HR
OSHA30
Daily training starts at 8:00 AM and finishes at 4:30 PM
OSHA construction standards, safety procedures, and regulations under 29 CFR 1926. Required for foremen and supervisors.
Construction Math
32HR
Daily training starts at 8:00 AM and finishes at 4:30 PM
Reading a tape measure, inches and engineers rule, basic arithmetic as well as fractions and decimals and how they apply to the construction industry for construction craft laborers. Highly recommended for all construction craft laborers.
TAPS Construction Training
80HR
FORM.W
PRE-REQ - Construction Math
Daily training starts at 8:00 AM and finishes at 4:30 PM
Various types of forms and forming systems used in concrete placement as well as structural steel erection, wood working, and oxy-acetylene/plasma cutting.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Asbestos Supervisor Renewal
8HR
Renewal: 8HR, annually
PRE-REQ - Current Asbestos Supervisor Certificate
Classroom and hands-on training in the remediation techniques and safety used in abatement. Certification pertaining to CFR 1926.1101.
Students shall pay $100 license fee by the first day of class to be eligible for training.
Coating (Fairbanks)
40HR
Consolidated in Fairbanks
PRE-REQ - Hazardous Paint Certification
Daily training starts at 8:00 AM and finishes at 4:30 PM
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Pipelaying I
40HR
PRE-REQ - Construction Math
Daily training starts at 8:00 AM and finishes at 4:30 PM
Introductory class focusing on underground storm drain systems, culverts, manholes and catchbasins.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.