Fairbanks Training Schedule
Fairbanks Training Schedule
Scroll Down this page or type the name of the course in the search bar to search all training offered during the winter 2023-24
Concrete Training
32HR
Daily training starts at 8:00 AM and finishes at 4:30 PM
Principles of concrete placement, cast in place, and various products used for patching and beautifying concrete.
First Aid CPR/AED
8HR
Renewal: 8HR, every 2 years
Certify students in techniques used in First Aid, CPR, and AED as specified by NSC (National Safety Council).
MSHA New Miner
16HR
Daily training starts at 8:30 AM and finishes at 4:30 PM
Designed to allow members to perform work in the above ground mining industry under subpart 48b or part 46 sand and gravel mines.
Traffic Control Supervisor (TCS)
16HR, renewal: 4 years
PRE-REQ: LiUNA Work Zone Safety Certification, 4,000 hours of experience or existing IMSA TCT Certificate or ATSSA TCS Certificate
Description: The 16-hour Traffic Control Supervisor course is designed to help the supervisor create a safe roadway construction work zone for workers and travelers by applying guidelines and developing structured processes for implementing internal and external traffic control plans. Participants gain critical knowledge in the types of traffic control devices and how they are used, set up and dismantled.
CESCL Renewal
AVAILABLE ON ZOOM
8HR
Renewal 8HR, every 3 years
PRE_REQ - Current CESCL Card
Erosion and sedimentation processes, the regulatory requirements, storm water pollution prevention plans, best management practices, inspection, record-keeping, and cold climate challenges.
MSHA New Miner
16HR
Daily training starts at 8:30 AM and finishes at 4:30 PM
Designed to allow members to perform work in the above ground mining industry under subpart 48b or part 46 sand and gravel mines.
Grade Checking IV, GPS I
40HR
Consolidated in Anchorage
PRE-REQ - Grade Checking III, Advanced Grade
Daily training starts at 8:00 AM and finishes at 4:30 PM
Hands-on course designed to familiarize grade checkers with GPS set up and field usage.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
First Aid CPR/AED
8HR
Renewal: 8HR, every 2 years
Certify students in techniques used in First Aid, CPR, and AED as specified by NSC (National Safety Council).
Pipelaying II
80HR
Consolidated in Anchorage
PRE-REQ - Pipelaying I
Daily training starts at 8:00 AM and finishes at 4:30 PM
An intermediate level course on the installation of water, sewer, and storm drain systems. Participants will work in real time with equipment, learn about trench safety, and installation practices.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Grade Checking III, Advanced Grade
80HR
Consolidated in Anchorage
PRE-REQ - Grade Checking II, Intermediate Grade
Daily training starts at 8:00 AM and finishes at 4:30 PM
Civil plan reading, advanced grade computations, horizontal and vertical curves, super elevated curves, volume computations, and line and grade for pipe.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Work Zone Safety (WZS)
16HR, renewal: 4 years
PRE-REQ: None
Description: Work Zone Safety course teaches participants about highway work zone hazards and actions workers can take to protect themselves while performing highway construction work. Participants learn about dangers associated with construction equipment, the types of roads and conditions that impact safety, traffic control zones, traffic control devices, hand-signaling devices, and environmental hazards. In addition, participants learn how to perform flagger duties safely and effectively.
MSHA New Miner
16HR
Daily training starts at 8:30 AM and finishes at 4:30 PM
Designed to allow members to perform work in the above ground mining industry under subpart 48b or part 46 sand and gravel mines.
Hazardous Waste Worker Renewal
8HR
Renewal: 8HR, annually
Hybrid Anchorage/Fairbanks
PRE-REQ - Current Hazardous Waste Certification
Safety and health orientation for containment and cleanup of hazardous waste. Certification pertaining to CFR 1910.120. Highly recommend for all Construction Craft Laborers.
First Aid, CPR/AED
8HR
Renewal: 8HR, every 2 years
Certify students in techniques used in First Aid, CPR, and AED as specified by NSC (National Safety Council).
Work Zone Safety (WZS)
16HR, renewal: 4 years
PRE-REQ: None
Description: Work Zone Safety course teaches participants about highway work zone hazards and actions workers can take to protect themselves while performing highway construction work. Participants learn about dangers associated with construction equipment, the types of roads and conditions that impact safety, traffic control zones, traffic control devices, hand-signaling devices, and environmental hazards. In addition, participants learn how to perform flagger duties safely and effectively.
OSHA 10
10HR
Introduction to OSHA construction standards, safety procedures, and regulations in 29 CFR 1926. Highly recommended for all construction craft laborers.
MSHA New Miner
16HR
Daily training starts at 8:30 AM and finishes at 4:30 PM
Designed to allow members to perform work in the above ground mining industry under subpart 48b or part 46 sand and gravel mines.
Hazardous Waste Worker Renewal
8HR
Renewal: 8HR, annually
Hybrid Anchorage/Fairbanks
PRE-REQ - Current Hazardous Waste Certification
Safety and health orientation for containment and cleanup of hazardous waste. Certification pertaining to CFR 1910.120. Highly recommend for all Construction Craft Laborers.
Asbestos Abatement Supervisor Certification
40HR
Renewal: 8HR, annually
Classroom and hands-on training in the remediation techniques and safety used in abatement. Certification pertaining to CFR 1926.1101.
Students shall pay $100 license fee by the first day of class to be eligible for training.
MSHA New Miner
16HR
Daily training starts at 8:30 AM and finishes at 4:30 PM
Designed to allow members to perform work in the above ground mining industry under subpart 48b or part 46 sand and gravel mines.
Hazardous Waste Worker Renewal
8HR
Renewal: 8HR, annually
Hybrid Anchorage/Fairbanks
PRE-REQ - Current Hazardous Waste Certification
Safety and health orientation for containment and cleanup of hazardous waste. Certification pertaining to CFR 1910.120. Highly recommend for all Construction Craft Laborers.
First Aid CPR/AED
8HR
Renewal: 8HR, every 2 years
Certify students in techniques used in First Aid, CPR, and AED as specified by NSC (National Safety Council).
Hazardous Waste Worker
40HR
Renewal: 8HR, annually
Safety and health orientation for containment and cleanup of hazardous waste. Certification pertaining to CFR 1910.120. Highly recommend for all Construction Craft Laborers.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Aerial Lift & Rough Terrain Forklift
24HR
Renewal: 8HR, every 3 years
Daily training starts at 8:00 AM and finishes at 4:30 PM
Safety, Inspection, and operation for rough terrain forklift and aerial lifts - MEWP (mobile elevating work platforms).
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Hazardous Paint Handlers Certification
16HR
Students shall pay the $100 license fee by the first day of class to be eligible for training.
Asbestos Supervisor Renewal
8HR
Renewal: 8HR, annually
PRE-REQ - Current Asbestos Supervisor Certificate
Classroom and hands-on training in the remediation techniques and safety used in abatement. Certification pertaining to CFR 1926.1101.
Students shall pay $100 license fee by the first day of class to be eligible for training.
Hazardous Paint Renewal
8HR
Hybrid Anchorage/Fairbanks
PRE-REQ - Hazardous Paint Initial
Students shall pay the $100 license fee by the first day of class to be eligible for training.
Hazardous Waste Worker Renewal
8HR
Renewal: 8HR, annually
PRE-REQ - Current Hazardous Waste Certification
Safety and health orientation for containment and cleanup of hazardous waste. Certification pertaining to CFR 1910.120. Highly recommend for all Construction Craft Laborers.
Aerial Lift & Rough Terrain Forklift
24HR
Renewal: 8HR, every 3 years
Daily training starts at 8:00 AM and finishes at 4:30 PM
Safety, Inspection, and operation for rough terrain forklift and aerial lifts - MEWP (mobile elevating work platforms).
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Scaffolding
40HR
Daily training starts at 8:00 AM and finishes at 4:30 PM
Frame, tube and clamp, systems, and safety regulations with an emphasis on building and design.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Pipelaying I
40HR
PRE-REQ - Construction Math
Daily training starts at 8:00 AM and finishes at 4:30 PM
Introductory class focusing on underground storm drain systems, culverts, manholes and catchbasins.
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.
Hoisting & Rigging
8HR
Renewal: 8HR, every 3 years
PRE-REQ - Construction Math
• Bring boots & work clothes for hands-on training in shop/field. Make sure your gear is current for weather conditions.
• Bring indoor shoes to replace muddy boots while in classrooms & building.